Captain
文章
15
分类
2
评论
1

Docker 部署 L2TP VPN

| 教程 •
字数总计 8136 | 阅读时长 20分钟 | 阅读量 97

启动容器

docker run \
   --name vpn \
   --restart=always \
   --network=host \
   -e VPN_IPSEC_PSK=vpn \
   -e VPN_USER=vpn \
   -e VPN_PASSWORD=vpn \
   -p 500:500/udp \
   -p 4500:4500/udp \
   -v /lib/modules:/lib/modules:ro \
   -d --privileged \
   hwdsl2/ipsec-vpn-server

支持 IKEv2 协议标准

docker exec -it vpn ikev2.sh --auto
================================================

IKEv2 setup successful. Details for IKEv2 mode:

VPN server address: 47.242.46.126
VPN client name: vpnclient

Client configuration is available inside the
Docker container at:
/etc/ipsec.d/vpnclient.p12 (for Windows & Linux)
/etc/ipsec.d/vpnclient.sswan (for Android)
/etc/ipsec.d/vpnclient.mobileconfig (for iOS & macOS)

Next steps: Configure IKEv2 clients. See:
https://vpnsetup.net/clients2

================================================

WIN10/11连接VPN配置

REG ADD HKLM\SYSTEM\CurrentControlSet\Services\PolicyAgent /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
REG ADD HKLM\SYSTEM\CurrentControlSet\Services\RasMan\Parameters /v ProhibitIpSec /t REG_DWORD /d 0x0 /f

WIN10/11 使用 ikev2 连接

把 vpnclient.p12 复制出来

docker cp vpn:/etc/ipsec.d/vpnclient.p12 /home/

新建 ikev2_config_import.cmd

@echo off
:: IKEv2 Configuration Import Helper Script for Windows 8, 10 and 11
:: Copyright (C) 2022 Lin Song <linsongui@gmail.com>
:: This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
:: Unported License: http://creativecommons.org/licenses/by-sa/3.0/
:: Attribution required: please include my name in any derivative and let me
:: know how you have improved it!

setlocal DisableDelayedExpansion
set "SPath=%SystemRoot%\System32"
if exist "%SystemRoot%\Sysnative\reg.exe" (set "SPath=%SystemRoot%\Sysnative")
set "Path=%SPath%;%SystemRoot%;%SPath%\Wbem;%SPath%\WindowsPowerShell\v1.0\"
set "_err====== ERROR ====="
set "_work=%~dp0"
if "%_work:~-1%"=="\" set "_work=%_work:~0,-1%"

for /f "tokens=4-5 delims=. " %%i in ('ver') do set version=%%i.%%j
if "%version%" == "10.0" goto :Check_Admin
if "%version%" == "6.3" goto :Check_Admin
if "%version%" == "6.2" goto :Check_Admin
goto :E_Win

:Check_Admin
reg query HKU\S-1-5-19 >nul 2>&1 || goto :E_Admin

where certutil >nul 2>&1
if %errorlevel% neq 0 goto :E_Cu
where powershell >nul 2>&1
if %errorlevel% neq 0 goto :E_Ps

title IKEv2 Configuration Import Helper Script
setlocal EnableDelayedExpansion
cd /d "!_work!"
@cls
echo ===================================================================
echo Welcome^^! Use this helper script to import an IKEv2 configuration
echo into a PC running Windows 8, 10 or 11.
echo For more details, see https://vpnsetup.net/ikev2
echo.
echo Before continuing, you must put the .p12 file you transferred from
echo the VPN server in the *same folder* as this script.
echo ===================================================================

set client_name_gen=
for /F "eol=| delims=" %%f in ('dir "*.p12" /A-D /B /O-D /TW 2^>nul') do (
  set "p12_latest=%%f"
  set "client_name_gen=!p12_latest:.p12=!"
  goto :Enter_Client_Name
)

:Enter_Client_Name
echo.
echo Enter the name of the IKEv2 VPN client to import.
echo Note: This is the same as the .p12 filename without extension.
set client_name=
set p12_file=
if defined client_name_gen (
  echo To accept the suggested client name, press Enter.
  set /p client_name="VPN client name: [%client_name_gen%] "
  if not defined client_name set "client_name=%client_name_gen%"
) else (
  set /p client_name="VPN client name: "
  if not defined client_name goto :Abort
)
set "client_name=%client_name:"=%"
set "client_name=%client_name: =%"
set "p12_file=%_work%\%client_name%.p12"
if not exist "!p12_file!" (
  echo.
  echo ERROR: File "!p12_file!" not found.
  echo You must put the .p12 file you transferred from the VPN server
  echo in the *same folder* as this script.
  goto :Enter_Client_Name
)

echo.
echo Enter the IP address (or DNS name) of the VPN server.
echo Note: This must exactly match the VPN server address in the output
echo of the IKEv2 helper script on your server.
set server_addr=
set /p server_addr="VPN server address: "
if not defined server_addr goto :Abort
set "server_addr=%server_addr:"=%"
set "server_addr=%server_addr: =%"

set "conn_name_gen=IKEv2 VPN %server_addr%"
powershell -command "Get-VpnConnection -Name '%conn_name_gen%'" >nul 2>&1
if !errorlevel! neq 0 (
  goto :Enter_Conn_Name
)
set "conn_name_gen=IKEv2 VPN 2 %server_addr%"
powershell -command "Get-VpnConnection -Name '%conn_name_gen%'" >nul 2>&1
if !errorlevel! neq 0 (
  goto :Enter_Conn_Name
)
set "conn_name_gen=IKEv2 VPN 3 %server_addr%"
powershell -command "Get-VpnConnection -Name '%conn_name_gen%'" >nul 2>&1
if !errorlevel! equ 0 (
  set conn_name_gen=
)

:Enter_Conn_Name
echo.
echo Provide a name for the new IKEv2 connection.
set conn_name=
if defined conn_name_gen (
  echo To accept the suggested connection name, press Enter.
  set /p conn_name="IKEv2 connection name: [%conn_name_gen%] "
  if not defined conn_name set "conn_name=%conn_name_gen%"
) else (
  set /p conn_name="IKEv2 connection name: "
  if not defined conn_name goto :Abort
)
set "conn_name=%conn_name:"=%"
powershell -command "Get-VpnConnection -Name '%conn_name%'" >nul 2>&1
if !errorlevel! equ 0 (
  echo.
  echo ERROR: A connection with this name already exists.
  goto :Enter_Conn_Name
)

echo.
echo Importing .p12 file...
certutil -f -p "" -importpfx "%p12_file%" NoExport >nul 2>&1
if !errorlevel! equ 0 goto :Create_Conn
echo When prompted, enter the password for client config files, which can be found
echo in the output of the IKEv2 helper script on your server.
:Import_P12
certutil -f -importpfx "%p12_file%" NoExport
if !errorlevel! neq 0 goto :Import_P12

:Create_Conn
echo.
echo Creating VPN connection...
powershell -command "Add-VpnConnection -ServerAddress '%server_addr%' -Name '%conn_name%' -TunnelType IKEv2 -AuthenticationMethod MachineCertificate -EncryptionLevel Required -PassThru"
if !errorlevel! neq 0 (
  echo ERROR: Could not create the IKEv2 VPN connection.
  goto :Done
)

echo Setting IPsec configuration...
powershell -command "Set-VpnConnectionIPsecConfiguration -ConnectionName '%conn_name%' -AuthenticationTransformConstants GCMAES128 -CipherTransformConstants GCMAES128 -EncryptionMethod AES256 -IntegrityCheckMethod SHA256 -PfsGroup None -DHGroup Group14 -PassThru -Force"
if !errorlevel! neq 0 (
  echo ERROR: Could not set IPsec configuration for the IKEv2 VPN connection.
  goto :Done
)

echo IKEv2 configuration successfully imported^^!
echo To connect to the VPN, click on the wireless/network icon in your system tray,
echo select the "%conn_name%" VPN entry, and click Connect.
goto :Done

:E_Admin
echo %_err%
echo This script requires administrator privileges.
echo Right-click on the script and select 'Run as administrator'.
goto :Done

:E_Win
echo %_err%
echo This script requires Windows 8, 10 or 11.
echo Windows 7 users can manually import IKEv2 configuration. See https://vpnsetup.net/ikev2
goto :Done

:E_Cu
echo %_err%
echo This script requires 'certutil', which is not detected.
goto :Done

:E_Ps
echo %_err%
echo This script requires 'powershell', which is not detected.
goto :Done

:Abort
echo.
echo Abort. No changes were made.

:Done
echo.
echo Press any key to exit.
pause >nul
goto :eof

管理员运行 ikev2_config_import.cmd

VPN client name: [vpnclient]  # 两个文件在同级目录 , 这里直接回车
VPN server address:  # 输入服务器IP , 不能用域名
IKEv2 connection name: [IKEv2 VPN 124.x.x.x]  # 起个VPN名字 , 直接回车就行

最后右下角选择VPN连接即可

文章作者： Captain
本文链接：
版权声明： 本站所有文章除特别声明外，均采用 CC BY-NC-SA 4.0 许可协议。转载请注明来自 One piece！
教程
喜欢就支持一下吧